How about bracket for crossing spans of HZP1600 launching cranes?
Bracket for crossing spans of HZP1600 segmental assembly launching cranes refers to a bracket connecting cantilever beam and suspended beam and transmitting loads from suspended beam.
segmental assembly launching crane
What are technical parameters of hydraulic system of HZP1600 launching crane?
| Item | Hydraulic systems of
front and rear support leg |
Hydraulic systems of
front and rear auxiliary support leg |
Overhead crane transverse hydraulic system | Sling adjusting hydraulic system | ||
| Oil pump working pressure | 28MPa | 25MPa | 25MPa | 25MPa | ||
| Rated flow of oil pump | 13.2L/min | 13L/min | 13L/min | 6.5L/min | ||
| oil pump motor power | 11kw | 7.5kw | 7.5kw | 4kw | ||
| Oil tank volume | 320L | 140L | 130L | 85L | ||
| Power supply | AC380V/50Hz | AC380V/50Hz | AC380V/50Hz | AC380V/50Hz | ||
| Oil cylinder working pressure | 28MPa | 28MPa | 25MPa | 25MPa | 25MPa | 25MPa |
| Oil cylinder capacity | 350t | 105t/80t | 63t/44t | 38t/18t | 50t/34t | 40t/40t |
| Oil cylinder operating stroke | 350mm | 1200mm | 500mm | 1100mm | 1600mm | 300mm |
| Remark | Jacking | Longitudinal moving | Transverse moving | Auxiliary support leg | Lifting trolley | Hanging |
How about hydraulic system of HZP1600 segmental assembly launching girder?
Hydraulic system of HZP1600 segmental assembly launching girder includes 8 sets hydraulic station, 8 sets jacking cylinders for front and rear support legs, 4 sets longitudinal cylinders for front and rear support leg, 2 sets lateral cylinder for front and rear support leg, 4 sets jacking cylinders for auxiliary front and rear support legs, 4 sets lateral cylinders for overhead gantry crane and 4 sets cylinders for sling adjustment.
HZP1600 segmental assembly launching girder
How about 10t overhead crane of segmental assembly launching girder?
10t overhead crane is of auxiliary work equipment of launching girder to lift small type articles on the bridge deck, as well as move in the length scope of main frame as walk platform between left and right main frame.
What is suspender of HZP1600 segmental assembly bridge girder launcher?
Suspender of HZP1600 segmental assembly bridge girder launcher is hanged on the hanging beam at inside of main girder
segmental assembly bridge girder launcher
What is sling of HZP1600 segmental assembly bridge girder launcher?
The sling of HZP1600 segmental assembly bridge girder launcher can realize 360?turning and 4% gradient adjustment.
segmental assembly bridge girder launcher
What protection devices are set for overhead gantry crane?
To adapt to special working environment for HZP1600 segmental assembly bridge girder launcher, below automatic protection devices are set for overhead gantry crane for lifting girders:
segmental assembly bridge girder launcher
What is introduction on overhead gantry crane for HZP1600 segmental assembly bridge girder launcher?
Overhead gantry crane for HZP1600 segmental assembly bridge girder launcher is made up of crane moving mechanism, metal structure, lifting system, hydraulic system, power supply system and electrical system
HZP1600 segmental assembly bridge girder launcher
How about main girder of HZP1600 segmental assembly launching girder?
main girder of launching girder
HZP1600 segmental assembly launching girder main girder is of steel box girder structure, made up of upper and bottom layer, connected by bolts in the middle. Total length of main girder is 58m, 5 sections in total, therein 11.75m long, 2 sections; 11.5m long, 3 sections. Main girder features simple structure, high stiffness, mature fabrication technology and other advantages.
Upper cover plate of main girder is equipped with rails for gantry crane and 10t overhead crane, space between two rails can be regards as working platform and cables laying platform for gantry crane and 10t overhead crane. Longitudinal slide-ways are arranged at two sides of bottom cover plate separately, longitudinal sliding rail at middle part. Hanging longitudinal girder is set up on top flange at inside of main girder
Upper and bottom connection beams are arranged on both ends of main girder.
What is guide beam of HZP1600 segmental assembly launching girder?
Front and rear guide beams of HZP 1600 segmental assembly launching girder are arranged symmetrically, two types of truss in total, two sections 9.7m long, one section 6.6m long.
HZP1600 segmental assembly launching girder
