THQ Bridge Girder Launcher for Tunnels

FAQ 九 08, 2014 No Comments

1.Introduction

THQ bridge girder launcher for tunnels is a kind of new high-speed rail bridging machine to address the problems of many tunnel in the construction of high-speed rail. The whole machine can go through the tunnel carried by the beam-conveying vehicle, not only saving the cost for disassembly and installation of bridge erecting and transport, but also ensuring the construction safety. It can be applied to the bridge erecting in the construction field continually.

===

2.Features

It can be used for the construction between the bridge and the tunnel, saving the cost for disassembly and installation and improving the efficiency.

The guide beam and the bridge girder launcher direct each other to vertically pierce the hole;easy operation, safety and reliability.

 Item/Amount/Type

 

THQ900

Rated lifting capacity(max lifting   capacity)(t)

900

Max size of bridge launcher(m)

32.6×12.6×3.05

 Traveling speed of bridge girder launcher(m/min)

0-3

Trolley traveling speed (m/min)

0-3(with heavy load)/0-6(without   load)

 Trolley lifting speed(m/min)

0-0.5(with heavy load)/0-1(without   load)

 Max   lifting height of trolley(m)

7

 Precast girder horizal fine-tuning distance(mm)

±200

 Precast girder fine-tuning speed(m/min)

0-1

 Min   radius of curved bridge(m)

1500

 Applicable longitudinal slope

20‰ for longitudinal slope and   40‰   for transverse slope

Power(kw)

300

Out dimension(m)

61×15.3×14.6

Total weight(t)

585

 

No Responses to “THQ Bridge Girder Launcher for Tunnels”

Leave a Reply