The Technical Requirements of the Overhead Crane

FAQ Jan 20, 2015 No Comments

 

The Technical Requirements of the Overhead Crane

1-110FGP92G58

1. The Installment of the motor and the reducer: a moderate number of the grease should be applied on the rear leg group. And the motor and the reducer should be fixed on the rear leg group.
2. The installment of the wheel group of the overhead crane: the wheel group of the motor and reducer should be in place. The beam of the overhead crane should be lifted on the wheel group of the overhead crane. And they should be connected to the pin roll and the bolts.
3. The installment of the lifting trolley and the head block assembly: the lifting trolley and the head block assembly should be placed on the beam of the overhead crane. The lifting trolley is above the head block assembly.
4. The installment of the hoist: the hoist should be placed on the base plate.
5. The placement of the overhead crane: the well completed overhead crane should be placed on the rail of the main beam.
6. The installment of the movable pulley and hangers: the rope of the hoist should be slack but be winded with the steel wire rope, which should be fixed with cable loop. The hangers should be connected to the movable pulley.

 

 

 

No Responses to “The Technical Requirements of the Overhead Crane”

Leave a Reply