HZQ40/100 honeycomb girder launching gantry

Special points for HZQ40/100 honeycomb girder launching gantry

FAQ Aug 17, 2015 No Comments

HZQ40/100 honeycomb girder launching gantry is developed to install pre-cast girder bridge, it can construct bridge in below range:

16

  1. span: <= 40m
  2. lifting capacity: <=100m
  3. longitudinal slope <= 5%
  4. cross slope: <=4%
  5. min curved radius for girder erection: >=400m
  6. main girder centre distance: 7.5m
  7. main girder length: about 70m

Special points for customers:

  1. design standard: China standards (or design parameters to suit foreign standards)
  2. applicable working condition with wind: <= 6 grade
  3. anchor must be done as the wind speed: <=20m/s
  4. rated design loads of launching gantry: 100t
  5. static loads: 1.25 x 100t
  6. dynamic loads: 1.1 x 100t
  7. power generating motor: not included
  8. power supply cable size and length: 3x 25+1, the length depends on worksite conditions
  9. winch: about 6t (single steel wire rope pulling force)
  10. frequency converter added for soft, slow start and stop
  11. safety monitoring system is added to send alarming signal in danger
No Responses to “Special points for HZQ40/100 honeycomb girder launching gantry”

Leave a Reply