The Technical Requirements of the Rear Leg

The Technical Requirements of the Rear Leg

1. The installment of the pump station: the tread plate should be placed inside the main beam support beside the rear leg, serving as a working platform. The oil pump should be placed on the working platform and fixed firmly with the iron wire. And then, the liquid oil should be poured into the oil pump.
2. The installment of the jack: the body of the jack should be fixed on the lifting lug of the main beam.
3. The installment of the motor and reducer: a moderate number of the grease should be applied on the rear leg group. And the motor and the reducer should be fixed on the rear leg group.
4. The installment of the bracket: the bracket should be covered on the telescopic tube. And then the racket and leg should be installed on the main beam with the bolts. The telescopic tubes should be connected with the jack.
5. The installment of the rear leg group: the rear leg group should be placed on the rail of the girder transport in working state.
6. The installment of the rear beam: the telescopic tube of the rear leg falls off. The telescopic tube of the rear leg should be connected with the rear beam.